Making an Acid Etched Superconductor Ring with Obsidian Facets

Making an Acid Etched Superconductor Ring with Obsidian Facets


Hey, what’s up my dudes today? I’ve got another superconductor ring video for you And now the story behind this ring is that I had a customer who wants a ring That’s very similar, but made out of a different material So I had the idea to do a practice of it first because I I wanted to do that anyways in the first place but I thought it’d look really cool in Superconductor so I decided to experiment do it with that and then I figured why not turn it into a YouTube video as well And I actually really do like the result so I’ll probably add it as an option to my website And you’ll see the end result. It’s actually really cool, and it might be something I want to add to my website. It is actually a really time-consuming process, so it might not even be worth my time to offer these on there But let me know what you think give me some feedback down below If you think it’d be worth it for me to throw it up on the website if you guys are interested I’ll do my best to get it on the site, so first off I’m cutting off a piece from my tilted superconductor rod And I did think this ring would look much better with the tilted superconductor on there So that’s why you see me cutting off the tilted piece. It’s not just because it was the easiest piece I had on hand I actually do think that having the Superconductor rods themself sticking out at a bit of an angle after I stick them in acid. I think that’s going to look really cool So after a few minutes of cutting on the metal bandsaw I’m able to cut all the way through and I’ve got this Kind of skiwampus cookie shape here and in order to fit this into my lathe jaws I actually need to trim down those oblong edges And so I’m just going to manually sand that down on my belt sander I went through two sanding belts just on this step So I definitely got the ten pack of sanding belts ready to go just because I’m just going through these like crazy You’ll see I stopped before it’s perfectly circled. That’s okay I just need it to fit in the lathe jaws and then once I can get that hole drilled out in the center and then Have it mounted onto the ring mandrel, then I can true it all up and make sure everything’s smooth and flat And how it should be. So to bore it out, I’m just using this center drill. These are made specifically for lathes And they’re just a really sturdy drill bit that you can just plunge straight into hard materials Just like this super conductor, and they they’re really durable and Unable to cut through it like almost nothing else will But that’s not to say that it’s not still a very difficult process to cut through superconductor. It’s actually really difficult The titanium and the super conductor makes it really hard to machine and then also the copper surrounding It is incredibly hard to work with. It hardens as you go, and it’s also a really gummy material So it’s getting gummed up and also hardening and causing problems there, so you go through drill bits like crazy I’m only going to get this one use out of this drill bit before I need to flip it around And then I’ll get probably one more use out of that on another super connector piece and this thing will be garbage so. super conductor Is definitely a really rough material to work with it uses up a bunch of tooling. Now that I’ve got the live center all the way through I’m going to switch to a boring bar And then I’m using the tungsten carbide bit on that and then I’m continuing the process I started so I’m just Hollowing it out more and more until I can get it to fit on the ring mandrel Now that I’ve got that hollowed out I’m putting my expanding ring mandrel on the lathe jaws And by the way I get a lot of questions in the comments of where to buy these you just go to bangle guy com he’s got them on there if they’re a really handy tool to have around the shop and if You don’t want to buy one from him if you’re tight on cash or something you can easily make one yourself It’s a really fun lathe project so if you’re wanting to make rings on your lathe Or you’re looking for lathe projects and might not make a ring mandrel, and if you’re interested Let me know in the comments. I could post a tutorial on how to do that I’m definitely no expert, but I’m sure I’d be able to manage and cut out a decent one of these Ok so I’ve got the ring blank on the mandrel, and I’m using my left handed lathe cutter And I’m just trimming down the outside diameter slowly Just and I’m doing this slowly just about a half a millimeter at a time and eventually I get through all the surrounding Copper that goes around the superconductor filaments And then I get to the part of the ring where it’s mostly those superconductor filaments, and because I’m not making this ring for a specific person or purpose I decided to pick and choose the pattern I wanted rather than the size I wanted, so I just cut into the superconductor until I saw a pattern that I thought was really cool And then I will make the size according to that outside diameter, so it’s kind of opposite most of the time So this is an interesting ring, it was fun to make like that, but it did turn out to be a pretty big ring though All right now, I’ve got the ring blank back in the lathe jaws. I need to widen the inner diameter of it So it’s not such a fat ring Then once I’ve got that widened, I’m using my dremel tool with a coarse sanding wheel on it, and I’m rounding out the edges So it has a nice comfort finish to it And then you’ll also notice that that lathe fit if you’re not really careful And I wasn’t super careful on this one it can leave a really kind of gross smeared finish to the superconductor So I’m also using the sander to grind that away and get a really nice clean surface finish on there And then of course at the end I switched to a finer Dremel sanding wheel and then I use that to clean up the inside And give it a smoother finish But I’m going to take it a step further for this ring. I’m going to take it over to my sanding wheel and then put a whole bunch of bevels and angles all over this ring and It’ll give it what I call an obsidian finish to this And you’ll see I have this option on my website for some of the carbon fiber rings as well as I used to do them For the Damascus steel rings as well. But the process is a little bit different for this you can’t hand forge that finish on there and then for the carbon fiber ones I like to use a dremel wheel to do that because it makes the shape a little bit more interesting But obviously with this superconductor. I wouldn’t be able to do that So you can see the process I’m using it’s fairly simple, but it’s just very time-consuming I’ve got the sanding table set up and it lets me do a bunch of different Angles on the Ring so all I do is I put about three to four bevels on to the ring I just sand a flat surface onto it and then I’ll adjust that angle to be a bit more steep and Then repeat the process Obviously I’m flipping the ring 180 degrees a couple times throughout the whole process so that I get it even on both sides And you’ll see when I show it off on the camera how these steps progress you can see it slowly. Transformed from that normal ring look that we had to this really cool angular obsidian finish. All right here that is you can see it’s got all those really cool faces to it It looks really cool under especially multiple different light sources It’s got a bunch of different reflections that show off all those faceted edges, so I think it looks really cool And this is a ring that I think will look really cool with a deep edge So I’m etching it over the span of about 12 hours So off camera I just had it in here all day I was just flipping it over every 30 minutes to an hour every time I’d think of it and that was to make sure I got a even consistent edge to it But then once that was done. I pull it out and you’ll see just how cool this thing turns out We still have one more step to do, but this thing’s looking great So now I’m going to throw it into the rock tumbler This will scrape away that reddish pinkish coating that the copper had over it And then it will also round away some of the Sharper edges that this had and I didn’t have enough time to do this as long as I would have liked you for the video Just because I wanted to get this out sooner, so I only got it in there for a few hours Whereas after I post this video. I’m gonna leave that in there for about four days, and that’ll make it a lot better And it’ll also help to hide some of the scratching from the sander That was on there the reason that I had those scratches in it is because I’m waiting for some finer sandpaper Discs to show up, but because this is a prototype I figured it’d be okay for this one so if you see those scratches And it kind of annoys you just know I’m triggered – I really wish I had some finer sandpaper discs for this But who knows maybe the rock tumbler will do a really nice job, and end up hiding those all together So we’ll see alright and after pulling it out this thing is finished Definitely be sure to let me know what you think down in the comments and now one thing that I noticed after Filming this was that I actually didn’t like the look of it on camera as much as I did in person I was trying to figure that out and I think the reason for that was because Doing it with all the soft lighting and video equipment that I had was where I try to get really even Consistent lighting and that’s good for most rings and most things But that’s not really where this ring shines And I mean that literally where it shines and what makes it cool is all those different faceted edges that it has So I actually took a video of it on my iPhone in just my living room And I think that really show those edges a lot more than the studio lighting does alright guys that’s all I’ve got for you in this week’s video if you want to check out my website where I sell rings like this and Of course many others you can see that. There’s a link down in the description You can also go to my Instagram That’s a great place to see what’s going on behind the scenes And it’s also a good place if you’re looking for a deal on the website That’s where I’ll post all the discount codes anything like that So be sure to follow me on there leave a like if you enjoyed the video And I will see you in the next one. Thanks

Comments

  1. Post
    Author
    Patrick Adair Designs

    Follow me on Instagram. I’m super active there! @patrickadairdesigns
    leave a comment on one of my posts so I can see if anyone actually does! Thanks my dudes!!

  2. Post
    Author
  3. Post
    Author
  4. Post
    Author
  5. Post
    Author
  6. Post
    Author
  7. Post
    Author
    Thomas Troxel

    The first thing I wondered was how the copper would "wear". Then, I saw it "finished", and I am wondering what will hold it together? I do hope it holds up. I can picture your heart "dropping", if it began to come "apart". It does have a really "cool", and "different" look about it. Good luck, and "God bless".

  8. Post
    Author
  9. Post
    Author
  10. Post
    Author
  11. Post
    Author
  12. Post
    Author
  13. Post
    Author
  14. Post
    Author
  15. Post
    Author
  16. Post
    Author
    J Flappkins

    That is so so so so cool. I wish I had one, my dad passed away a few months ago and he was a lineman, this ring reminds me of him

  17. Post
    Author
  18. Post
    Author
  19. Post
    Author
  20. Post
    Author
  21. Post
    Author
  22. Post
    Author
  23. Post
    Author
  24. Post
    Author
  25. Post
    Author
  26. Post
    Author
  27. Post
    Author
    Billy Paraskevopoulos

    You can never ever make jewelry, stones and reflecting metals photos or videos look as good as they do in real life. Period.

  28. Post
    Author
  29. Post
    Author
  30. Post
    Author
  31. Post
    Author
  32. Post
    Author
    Hardus Lauwrens

    Sorry I had to stop watching the video after your first two steps… you talk about lathes and the tools as if you are useing them correctly but you cleary are not.

  33. Post
    Author
  34. Post
    Author
  35. Post
    Author
  36. Post
    Author
  37. Post
    Author
  38. Post
    Author
  39. Post
    Author
  40. Post
    Author
  41. Post
    Author
  42. Post
    Author
  43. Post
    Author
  44. Post
    Author
  45. Post
    Author
  46. Post
    Author
    Jimmy Amaya

    I will love on how can I buy it from u I'm in love with it so much that I will yust it for my wedding ring please contact me look me up on Facebook my name on it is Jimmy amaya ok You'll see a picture of my sister and I and I'm old dressed up on my wedding suit

  47. Post
    Author
  48. Post
    Author
  49. Post
    Author
  50. Post
    Author
  51. Post
    Author
  52. Post
    Author
  53. Post
    Author
  54. Post
    Author
  55. Post
    Author
  56. Post
    Author
  57. Post
    Author
  58. Post
    Author
  59. Post
    Author
  60. Post
    Author
    omgeodude

    Whooooa! I’m so glad I found this vid, even super late! This obviously took a lot of time and resources but the end result was just about the coolest thing ever. I love that organic sort of geological look to it, like the hardened surface of a lava floe or something. It really speaks to the rock-and-earth enthusiast in me. This ring is powerful, I dunno how else to say it, hahaha!

  61. Post
    Author
  62. Post
    Author
  63. Post
    Author
  64. Post
    Author
  65. Post
    Author
  66. Post
    Author
  67. Post
    Author
  68. Post
    Author
  69. Post
    Author
    vegetayami

    it looks really nice ! a love it. but sadly even if i can understand the price i am not used to pay a lot for jewelry BUT ive watched the site and i might one day pay maybe one of the "cheaper" ones i just have to watch if it can be shipped to germany

  70. Post
    Author
  71. Post
    Author
  72. Post
    Author
    John Ligkas

    Acid-obsidian ring

    +10 health
    +10 defense
    passive:fire immunity:take no fire damage
    acid:it was made with acid(kinda(acid etched)) so +acid on all attacks
    superconductor:-20 electric resistance +20 electric attack +100% chance to get struck by lightning on a lightning storm
    price:1.000.000.000 gold

  73. Post
    Author
  74. Post
    Author
  75. Post
    Author
  76. Post
    Author
  77. Post
    Author
  78. Post
    Author
  79. Post
    Author
  80. Post
    Author
  81. Post
    Author
  82. Post
    Author
  83. Post
    Author
    Dam Mad

    I know this is a couple of years old but i just had to stop and tell ya that looks killer ! i hope you were happy with the final finish in the end but it looked great to me in this. But i know do that is a bad ass, tool muchin and breaking material to work with…Respect, peace.

  84. Post
    Author
  85. Post
    Author
  86. Post
    Author
  87. Post
    Author
  88. Post
    Author
    Sudharshan Snit

    I love your work and the design that you make of the ring and materials and I like sorry I love to buy them but I am from India I am not that kind of rich person so I love it but one day I hope please put more videos I like to watch How you prepare them I like glowing stones and Titanium rings more some sandstones fire stones

  89. Post
    Author
  90. Post
    Author
  91. Post
    Author
  92. Post
    Author
  93. Post
    Author
  94. Post
    Author
  95. Post
    Author
  96. Post
    Author
  97. Post
    Author
  98. Post
    Author
  99. Post
    Author
  100. Post
    Author

Leave a Reply

Your email address will not be published. Required fields are marked *